Addax Petroleum Development Petroleum (Nigeria) Limited - Tender Opportunity: Provision of RIG Support Services in OML-124

1.) Introduction:
Addax Petroleum Development (Nigeria) Limited (hereinafter referred to as “APD(N)L”) invites interested and pre-qualified Contractors to respond to this tender opportunity for the provision of the following services as detailed in item 2 below, at APD(N)L’s 0ML424 [Onshore] facilities. The contracts are proposed to commence in Q3, 2013 arid continue for a duration of two (2) years with APD(N)L having the sole option to extend the duration for a further period of one (1) year.

2.) Scope of Services Requirements:
As a minimum requirement, the selected Contractor shall have the necessary experience, capability and shall be fully responsible for the provision of Requirement and Services suitable for use in an offshore operation as listed in the table below;

Tender No.: TB-3067 Casing &Tubular Running Services
NJQS Category: 3.04.05
Scope of Work Description: Contractor must be able to provide Casing &Tubular Running Equipment and Services including but not limited to the following

• Casing &Tubular running equipment for OD sizes of 36”, 30”, 20, 13-3/8”, 11-3/4”, 9-7/8”, 9-5/8”, 7-5/8”, 7”, 4-1/2, 3-1/2, 2-7/8” and 2-3/8”;
• Tubular running servicers
• Bucking services and pressure testing of bucked sub-assemblies;
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to to satisfactorily perform the above services

Tender No.: TB-3085 Fishing Services
NJQS Category: 3.04.12
Scope of Work Description: Contractor must be able to provide Fishing Tools and Services including but not limited to the following:

• Single trip whipstock tem for casing sizes 7”, 75/8”, 95/8”, 13 3/8”and 20”of light and heavy wall thickness;
• Various types and sizes of mills (starting, window, watermelon, string section, junk and tapered mills) dressed with tungsten carbide particles;
• Fishing tools for various drilling tool operations (fishing jars, accelerators, intensifiers, bumper subs, overshots, overshots extension, reverse circulating junk baskets, control/packer grapple, string and ditch magnets, taps, washover pipes, abandonment tools etc, for drilling, logging and testing operations;
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily the above services.

Tender No.: TB-3086 Drilling Tools Rental Services
NJQS Category: 3.04.99 & 1.01.13
Scope of Work Description: Contractor must be able to provide Drilling Tools/Equipment Rentals Services including but not limited to the following:

• Drilling tools (various of drilling jars, subs, hole openers, under-reamers, accelerators, drill collar, heavy weight drill pipes, drill pipes, pup joints, cross-over bit subs, non-magnetic drill collar etc);
• BOP related equipment 5K, 10K and 15K rated (various sizes of flanges, double studded adaptors, riser spools, BOP flanges, BOP rams & other accessories, IBOP valves, Kelly valves, side entry subs, safety damps, stabbing guide, mud basket etc).
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3081 Drilling Completion Fluids & Mud Engineering services
NJQS Category: 3.04.15
Scope of Work Description: Contractor must be able to provide Drilling/Completion Fluids/Chemicals and Engineering Services including but not limited to the following:

• Mud design formulation and engineering
• Materials/chemicals and engineering for water based and synthetic based drilling fluids.
• Materials/chemicals and engineering services for reservoir drill-in fluids;
• Materials/chemicals and engineer services for well completion fluids
• Base oil;
• Liquid and bulk storage facilities;
• All drilling/completion fluids and chemicals must be approved my DPR
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3066 Surface Testing Services
NJQS Category: 3.04.16
Scope of Work Description: Contractor must be able to provide Surface Testing Equipment & Services including but not limited to the following:

• Surface testing equipment and personnel required to handle flow-back of well effluent during Well Testing and cleanup operations. The SOW covers the equipment needed from the rotary table through to the burner booms. The equipment proposal must be able to fulfill the following requirements
• Safe flow, containment and control of well effluent during all phases of the operation
• Safe disposal of well effluent according to regulatory environmental requirements
• Measurement and sampling of well effluent during flow-back operations
• Measurement and recording of all flow parameters
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3065 Cement and Cementing Services
NJQS Category: 3.04.04
Scope of Work Description: Contractor must be able to provide Cement & Cementing Services including but not limited to the following:

• Onshore truck-mounted diesel driven cement unit, equipped with muffler and spark arrestors, 10,000 psi rated with twin pumps c/w dual stage 8 bbl/mm re-circulating Mixer, automatic density control system and digital data acquisition package for pump rate, pressure, fluid density cumulative volume, fluid density e.t.c
• Cement design, formulation, laboratory testing and engineering;
• Cement, cement chemicals and additives onshore bulk plant for cement delivery
• Cementing equipment accessories such as float collar float shoe, stage collars, centralizers, stop collars, wiper plugs, subsea release plug systems and associated surface cementing head
• Squeeze packer testing/ treatment packers, bridge plugs, cement retainers, storm packers/valves etc
• Pumping and pressure testing services, including low pressure gauge manifold;
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3083 MWD/LWD/DD Services
NJQS Category: 3.04.08 & 3.04.31
Scope of Work Description: Contractor shall have the necessary experience, capability and shall be fully responsible for the provision of MWD/IWD/DD tools and services including but not limited to the following:

• Directional Drilling Services and Measurement While Drilling Tools (rotary steerable tools- push and point the bit technology, adjustable mud motors, geosteering tools, etc in various sizes;
• Logging While Drilling Tools (formation and annular pressure while drilling tools, minimum 8 curves multi-depth and multi-frequencies resistivity,
• azimuthal resistivity, neutron, azimuthal density sonic, density caliper ultra sonic azimuthal caliper, etc in various sizes);
• Note: All nuclear sources should be retrievable type or a non-hazardous non-retrievable type;
• Geosteering Service;
• Real-Time Drilling Operations Monitoring and transmission services including satellite internet connectivity provisions;
• Tools and all required accessories to support 3rd party Gyro While Drilling (GWD) services;
• Geotechnical modeling services;
• Well planning services;
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3078 Mud Logging Services
NJQS Category: 3.04.07
Scope of Work Description: Contractor shall have the necessary experience, capability and shall be fully responsible for the provision of, including but not limited to, the following;

• Mud logging unit;
• Basic mud logging equipment/tools;
• Advanced mud logging equipment/tools;
• Tools to predict formation pore pressure during drilling operation using data from all available rig resources.
• Early Kick detection tools I appliances / softwares capabilities
• Tools/sensor capabilities for High pressure and high temperature environment
• Visual warning light and audible alarm to indicate well flow (drilling, tripping and connections) or other suitable alarm indicator system in driller’s do house.
• Monitor screen in Company Man’s office on the rig.
• Tools to monitor connection flowback and analysis to differentiate between well ballooning or/and well flow when pumps are turned off.
• Differential flow monitoring to identify both well outflow and losses to the wellbore.
• Formation logging,
• All necessary Consumables arid spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services

Tender No.: TB-3070 Solid Control Services
NJQS Category: 3.04.15
Scope of Work Description: Contractor must be able to provide Solids Control Equipment & Services including but not limited to the following

• Solids Control equipment (high and variable speed centrifuge, cuttings Drier/ mud recovery system, complete auger system and mono pumps/ diaphragm pump, mud high pressure steam clean etc);
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services

Tender No.: TB-3082 Wireline Services
NJQS Category: 3.04.24
Scope of Work Description: Contractor must be able to provide Wireline Logging Equipment and Services including but not limited to the following:

• Wireline logging unit and tools including VSP, Oil Based Mud Borehole Imager, resistivity, neutron density sonic, Formation pressures, Downhole Fluid Identification and Sampling, etc;
• Open and Cased hole Wireline Logging services;
• Associated Data processing services
• Real-Time Logging Operations Monitoring and transmission services including satellite internet connectivity
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services
• Tender No.: TB-3087 Slickline Services
• NJQS Category: 3.04.24
• Scope of Work Description: Contractor must be able to provide Slickline Tools/Equipment & Services inducing but not limited to the following;
• Slickline tools/equipment (double drum slick-line unit c/w power pack, hydraulic BOP’s & pressure control equipment, rope sockets, pulling/ running tools, gauge cutters, blind boxes etc),
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3080 Downhole Testing Services
NJQS Category: 3.04.30
Scope of Work Description: Contractor must be able to provide Downhole Testing Equipment & Services including but not limited to the following;

• Drill Stem Test (DST) (various sizes of retrievable and permanent downhole testing packers, locators and seal assemblies, safety valves, testing and circulating valves, gauge carriers, bottom hole sampler carriers, rupture disk and tubing fill valves, surface test tree manual valves, hydraulic actuator, swivel, check valve emergency shutdown system, high accuracy and high resolution gauges, surface readout equipment etc).
• Tubing conveyed perforation (TCP) (-various sizes/charges /shot per foot tubing conveyed perforation RDX & HMX guns, gun spacer automatic gun drop sub, mechanic firing heart, mechanic and automatic tubing release, automatic time-delay fixing head, pressure vent etc.All necessary Consumables and spare pails; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3075 Coil Tubing and Nitrogen Services
NJQS Category: 3.04.37
Scope of Work Description: Contractor must be able to provide Coiled Tubing Unit, Equipment & Nitrogen Lift Services including but not limited to the following;

• Truck mounted wiled tubing unit coil tubing control cabin with impact resistant windows and contains all necessary controls, communication and calibrated monitoring facilities to ensure a safe and efficient operation;
• Coil Tubing Lift Frame as per API 8C with power supply and accessories.
• Crossovers to Pressure Control Equipment and tubulars.
• Long Bails.
• Coiled tubing reel capable of operating with pipe diameters between 1¼”and 23/8” (inclusive) with a drum capacity of up to 15,000ft x 10,000 psi;
• Coiled tubinginjectorhea4 Stuffing Box/ Dud Stripper, Dual Shear Seal BOP;
• Power Pack for power supply;
• Coiled tubing tools such as Straight bar Connector, Emergency disconnect, Check valves, Jetting nozzles, Fishing equipment and Connectors for well intervention tools, jars, motors, impact hammers, accelerators.
• Data acquisition unit;
• Pumping unit;
• Nitrogen and Nitrogen quads;
• Flow back storage tanks;
• Toolbox with fishing tools and equipment for all coil tubing tools specified.
• Nitrogen converter capable of delivering nitrogen at 350sct/min at a pump output pressure of 3000psi etc); and will include; Inlet and exhaust flame traps, over-speed shutdown, High exhaust or water temperature shutdown, Anti-static equipment and Inertia or air starter motors.
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3072 Gyro Services
NJQS Category: 3.04.29
Scope of Work Description: Contractor must be able to provide Gyro Tools/Equipment arid Services including but not limited to the following;

• Battery operated memory single-shot/ multi-shots North Seeking Gyro services deployable by Drop, wireline or slickline
• Single-shot I multi-shots surface readout North Seeking Gyro
• Multi-axis Gyro sensor multi-shots continuous North Seeking Gyro
• North Seeking Gyroscopic probe operational in MWD collar of various major directional drilling contractors
• GRJCCL subs to run in some applications with North Seeking Gyro tools
• Mono cable or multi-conductor wireline unit and accessories
• Gyro While Drilling (GWD) Tools;
• Wireline pressure control equipment
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3069 Surface Well- head Equipment and X-mas Trees Supply/Sen- vices:
NJQS Category: 1.01.09
Scope of Work Description: Contractor must be able to provide Surface Wellhead Equipment & X-mas Tees Services including but not limited to the following;

• Complete Single Bore Compact wellhead system with profiles for 9-5/8”47 ppf and 7”29 pf casing strings.
• Complete Single Bore Compact wellhead system with profiles for 13-3/8”68 ppf and 9-5/8 47 ppf casing strings.
• Complete Dual Bore wellhead system with profiles for 36”, 13-3/8” 68 ppf and -5/B”47 ppf casing strings.
• Complete Stack-up wellhead system with profiles for 9-5/8”47 ppf and 7”29 ppf casing strings.
• Complete Stack-up wellhead system with profiles for 13-3/8”68 ppf and 9-5/8 47 ppf casing strings.
• Complete Stack-up wellhead system with profiles for 20”94 ppf, 13-3/8”68 ppf arid 9-5/8”47 ppf casing strings.
• Block type Single String Xmas Tress assembly with Actuator and Choke box for 7”, 5”, 4-1/2”, 3-1/2” and 2-7/8” tubing strings.
• Stack-up7’pe Single String Xmas Tree assembly with Actuator and Choke box for 7”, 5”, 44/2”, 3-1/2” and 2-718” tubing strings.
• Block Type Dual Strings Xmas 1ee assembly with Actuators and Choke boxes for 3-1/2” and 2-7/8” tubing strings.
• Stack-up l5rpe Dual Strings Xmas Tree assembly with Actuators and Choke boxes for 3-1/2” and 2-7/8” tubing strings.
• Running tools to effectively deploy wellheads, function and pressure test same (including wear bushings to enable drilling operations through the wellheads).
• Surface wellhead should be capable to accept another contractor’s Xmas tree and other ancillary tools as may be required without any technical issue.
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3068 Welding Habitat Services
NJQS Category: 3.05.17
Scope of Work Description: Contractor must be able to provide Welding Habitat and Welding Service including not limited to the following;

• Provision of Welding Habitat, suitable for welding operations in Zone 1 hazardous areas. Including but not limited to welding on oil well Conductor pipes and casing strings;
• Provision of Pre-welding/Post-welding heat treatment equipment and materials;
• Provision of welders trained to conduct welding and arc-cutting/flame cutting operations and inspectors trained to conduct inspection in their respective category
• Provision of all consumables and spare parts for equipment on a consignment basis; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services

Tender No.: TB-3076 Completion Services - Cased Hole and liner Hanger
NJQS Category: 3.04.21
Scope of Work Description: Contractor must be able to provide Cased Hole Completion Equipment, Liner Hanger & Services including but not limited to the following;

• Cased hole upper completion for horizontal wells (3-1/2”9.3# EUE, 4-1/2” 12.6# Vam top tubing retrievable subsurface safety valve flapper type, c/w self-equalizing feature, permanent lock open feature, and 2.81” nipple adapter w/B pprofile c/w jam nut type connection for ¼” control line, tubing mounted nipples, flow couplings, gas lift mandrels,  gas lift valve, adjustable swivel sub, sliding sleeve door, tubing fill test valve, tubing mounted retrievable production packers, hydraulic/electric line set retrievable production packers, location seals, units and self-indexing guide shoe etc).
• Bucking services and pressure testing of bucked sub-assemblies.
• Calibration and setting/loading of gas lift valves.
• Liner hanger equipment (hydraulically set rotating & non-rotating liner hanger, tie back equipment, setting plugs, wiper ball, etc) for various casing sizes and weights.
• Liner top packers for various casing sizes and weights.
• Tie-back seal assemblies/ Packer for various casing sizes and weights.
• Liner banger running tools and services
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3077 Completion Service - Stand Alone and Expandable Sand Screen
NJQS Category: 3.04.21
Scope of Work Description: Contractor must be able to provide Stand Alone and Expandable Sand Screen & Services including but not limited to the following;

• Various sizes of standard and high premium Stand Alone Screen (SAS) w/varying gauges or mesh sizes with BTC threads
• Various sizes of controlled delayed swell packers in synthetic oil based mud (oil and water swellable) with BTC threads.
• Various sizes of Expandable Sand Screen (ESS) w/varying gauge or mesh sizes
• Various sizes Expandable blank pipes
• Appropriate bangers and packers for various casing sizes.
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3071 Gravel Packing Services
NJQS Category: 3.04.33
Scope of Work Description: Contractor must be able to provide Gravel Pack Frac Pac, Single Trip Perf Pac Equipment and Service including but not limited to the following;

• Pumping Equipment (pumping unit, flowlines, valves, hoses, acid mixer, acid return tanks, etc);
• Packing Materials (chemicals, proppant, etc);
• Downhole Tools to perform standard Gravel Packing.
• Complete Downhole Tools to perform Frac Packing in various hole sizes;
• Downhole Tools including DST tools, TCP tools and Guns to perform a Single Trip Perf Packing System in various hole sizes;
• Selective Horizontal Open Hole Gravel Packing with Inflow Control devices on the screens.
• Various sizes of premium wire wrap sand screen in various mesh sizes and design profiles suitable for each of the packing methods listed above;
• Filtration of packing fluid;
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Tender No.: TB-3092 Coring Services
NJQS Category: 3.04.11
Scope of Work Description: Contractor must be able to provide Core Acquisition Equipment and Preservation Services including but not limited to the following;

• Coring Equipment & Tools (12 1/4”, 8 1/2” and 6” coring system/tools for consolidated and unconsolidated formation);
• Coring services (consolidated and unconsolidated formations);
• Core preservation services;
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

3.) Mandatory Requirements;
3.1. To be eligible for any f the tender exercise, interested contractors are required to be pre-qualified in the Product/Services category in NipeX Joint Qualification System NJQS) database. All successfully pre-qualified supp1iei in this category will receive Invitation to Tender (ITT).

3.2. To determine if you am pm-qualified and view the product /service category you are listed Ion Open www.nipexng.com and access NJ with your log in details click on ‘continue joint Qualification Scheme tool, dick on ‘check my supplier status and thereafter click on supplier product group’.

3.3. If you are not listed ma product/service category that you registered with DPR to do business, contact NipeX office at 30, Oyinkan Abayomi Street, Ikoyi, Lagos with your DPR certificate as evidence foe verification and necessary update.

3.4. To initiate the JQS Pre-qualification process, access www.nipexng.com to download the requisite application form, make necessary payments and contact NipeX office for further action

3.5. To beellglb1e all tenderers shall be required to comply with the Nigerian Content requirements in the NipeX system.

4.) Nigerian Content Requirements:
Tenderers are to note that they will be requested during the technical tender to provide details of their relevant strategy to ensure that they fully company with the Nigerian Oil & Gas industry Content Act, 2010 as provided at www.nnpcgroup.com and www.nigcontent.com, in view of the fact that non-compliance will constitute a fatal flaw in all contract evaluations.

In light of the above, Tenderers shall be expected by the Nigerian Content Development Monitoring Board (NCDMB) to:

• Demonstrate that the entity proposed for execution of the service, is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies inducting evidence or plans of physical operational presence and set-up in Nigeria.
• Furnish details of company ownership and share holding structure. With photocopies of its CAC Forms C02 and C07.
• Provide evidence of what percentage of its key management positions are held by Nigerians and what percentage of the total work force are Nigerians. And also show overall percentage of work to be performed by Nigerian resources relative to total work volume.
• Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all the Nigerian companies and personnel that will be involved in executing the work.
• State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop.
• Provide detailed plan for staff training and development on engineering project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.
• Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).
• Provide detailed description of the location of in-country facilities (Equipment, storage, workshops, repair, maintenance and testing facilities)
• Provide detailed statement with evidence of how it intends to maximize the use of Nigerian made goods and services.
• Provide details on any other Nigerian Content initiative the company is involved in.
• Provide MOA with Oil & Gas trainers association (OGTAN) registered facility for both class room type (theoretical) and on-the-job training attachment for the duration of the project.
• Provide evidence of minimum 50% equity ownership of equipment by Nigerian subsidiary.

5.) Closing Date
Only tenderers who are registered with the NJQS Product//Category respectively as at 1200 Hours on February 28, 2013 being the advert closing date shall be invited to submit Technical Bids.

6.) General Conditions

• Please note that all interested Contractors are required to strictly adhere to following condition’ in relation to their response to this Advert:
• As stated in item 3 hereto, Contractors are required to be pre-qualified in NJQS under this specific Services category to be eligible to participate in this tender opportunity
• All costs incurred in preparing and processing NJQS pre-qualification and responding to this Tender Opportunity shall be to the Contractor’s own account.
• This Advert shall neither be construed as any form of commitment on the part of APE(N)L to award any contract to any Contractor and or associated contractors, sub-contractors or agents, nor shall it entitle pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from APE(N)L and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
• The tendering process shall be undertaken in accordance with the NNPC contracting process which requires pre-qualified Contractors to submit their documentation in the following manner:
  • Pre-Qualified contractors in the relevant Product/Services category in NJQS will be requested to submit their Technical Tenders.
  • Following the Technical evaluation process, only technically acceptable and financially qualified contractors will be requested to submit their Commercial Tenders.
• APE(N)L will communicate only with authorised officers of the qualifying Contractors at each stage of the Tender process, as necessary, and will NOT communicate through individuals or appointed Agents.

Please visit the NipeX portal at www.nipexng.com for this Advert and other relevant information.