Tender Opportunity for the Onshore Drilling Services NPDC, Lagos State

The Nigerian Petroleum Development Company Limited has a work programme to drills complete and test wells in an onshore field on behalf of the JV Partners (NNPC, SPDC, TEPNL & NAOC). The estimated duration for the drilling and completion project is twenty four (24) months with 12 months optional extension period.

Tender Opportunity for the Onshore Drilling Services NPDC

Scope of Work:
The Integrated Oil and Gas Development projects (IOGD) are expected to commence 1st Quarter 2015 for duration of twenty four (24) months with 12 months optional extension period.
Tenders are therefore required from suitable and reputable companies having the requisite experience and capability in respect of the work packages,

As a minimum requirement, the selected Contractor shall have the necessary experience, capability and shall be fully responsible for the provision of Equipment and Services suitable for use in an onshore operation as listed in the table below;

NPDC Tender No: EGBW-IOGD-2.007A, Downhole and Drilling Tools Rental Services
NJQS Code/Category- Production/Technology: 01.03/3.04.99 (Drilling Tools & Retrieval Production Tools/other Drilling Services)
Scope of Work Description: Contractor must be able to provide the following:

• Drilling Tools/Equipment Rentals Services including but not limited to the following: Drilling tools (various sizes of drilling jars, subs, hole openers, under-reamers, accelerators, drill collar, heavyweight drill pipes, drill pipes, pup joints, cross-over, bit subs, non-magnetic drill collar etc);
• BOP related equipment 5K, 10K and 15K rated (various sizes of flanges, double studded adaptors, riser spools, BOP flanges, BOP rams & other accessories, IBOP valves, Kelly valves, side entry subs, safety clamps, stabbing guide, mud basket etc);
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

NPDC Tender No: EGBW-IOGD-2.007B, Fishing Services
NJQS Code/Category- Production/Technology: 3.04.12/1.01.06 (Fishing/Wire line Fishing Services/Fishing and Repair Tools)
Scope of Work Description: Contractor must be able to provide Fishing Tools and Services including but not limited to the following:

• Single trip whipstock system for casing sizes7”, 7 ^5/8, 9 ^5/8, 13 ^3/8 and 20” of light and heavy wall thickness;
• Various types and sizes of mills (starting, window, watermelon, string, section, junk and tapered mills) dressed with tungsten carbide particles;
• Fishing tools for various drilling tool operations (fishing jars, accelerators, intensifiers, bumper subs, overshots, overshots extension, reverse circulating junk baskets, control/packer grapple, string and ditch magnets, taps, washover pipes, abandonment tools etc, for drilling, logging and testing operations;
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

NPDC Tender No: EGBW-IOGD-2.0013, Coring Services
NJQS Code/Category- Production/Technology: 3.04.11 (Coring Services)
Scope of Work Description: Contractor must be able to provide Core Acquisition Services Equipment and Preservation Services including but not limited to the following:

• Coring Equipment & Tools (12 ^1/4, 8 ^1/2 and 6 Coring system/tools for consolidated and unconsolidated formation);
• Coring services (consolidated and unconsolidated formations);
• Core preservation services;
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

NPDC Tender No: EGBW-IOGD-2.0016, Coiled 3.0437 Coiled Tubing Services
NJQS Code/Category- Production/Technology: 3.04.37 (Coiled Tubing Services)
Scope of Work Description: Contractor must be able to provide Coiled Tubing Unit, Tubing Services Equipment & Nitrogen Lift Services including but not limited to the following;

• Truck mounted coiled tubing unit - coil tubing control cabin with impact resistant windows and contains all necessary controls, communication and calibrated monitoring facilities to ensure a safe and efficient operation;
• Coil Tubing Lift Frame as per API 8C with power supply and accessories,
• Crossovers to Pressure Control Equipment and tubular Long Bails;
• Coiled tubing reel capable of operating with pipe diameters between 1¼” and 2 3/s” (inclusive) with a drum capacity of up to 15,000ft x 10, 000 psi;
• Coiled tubing injector head, Stuffing Box I Dual Stripper, Dual Shear Seal BOP;
• Power Pack for power supply;
• Coiled tubing tools such as; Straight bar, Connector, Emergency disconnect, Check valves, Jetting nozzles, Fishing equipment and Connectors for well intervention tools, jars, motors, impact hammers, accelerators.
• Data acquisition unit
• Pumping unit;
• Nitrogen and Nitrogen quads;
• Flow back storage tanks;
• Toolbox with fishing tools and equipment for all coil tubing tools specified.
• Nitrogen converter capable of delivering nitrogen at 350scf/min at a pump output pressure of 3000psi etc); and will include; Inlet and exhaust flame traps, over- speed shutdown, High exhaust or water temperature shutdown, Anti-static equipment and Inertia or air starter motors.
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

NPDC Tender N0: EGBW-IOGD-2.0017A, Downhole Completions Equipment/Services
NJQS Code/Category- Production/Technology: 3.04.21 (Well Completions Services)
Scope of Work Description: Contractor must be able to provide Downhole Completions Downhole Completions Services including but not limited to the following;

• Downhole Completions equipments
• Consumables/spare parts; and
• Other related equipment, personnel and services, the completion design is projected to achieve the following objectives:
• Sand Control in the forms of Downhole Completions, Expandable Sand Screens
• Completion design and equipment for sand control design in 9-5/8, 7” cased hole and 12-1/4”Open Hole
• Single/Multiple zone cased / open hole completions
• TR-SCSSV/WR-SCSSV to be set at designed depths.

NPDC Tender N0: EGBW-IOGD-2.0017B, Gravel Pack Equipment & Services
NJQS Code/Category- Production/Technology: 3.04.33 (Gravel Packing Services)
Scope of Work Description: Contractor must be able to provide Gravel Pack, Frac Pac, Gravel Pack Equipment & Services Single Trip Pert Pac Equipment and Services including but not limited to the following;

• Pumping Equipment (pumping unit, flowlines, valves, hoses, add mixer, acid return tanks, etc);
• Packing Materials (chemicals, proppant, etc);
• Downhole Tools to perform standard Gravel Packing
• Complete Downhole Tools to perform Frac Packing in various hole sizes;
• Downhole Tools including DST tools, TCP tools and Guns to perform a Single Trip Pert Packing System in various hole sizes;
• Selective Horizontal Open Hole Gravel Packing with Inflow Control devices on the screens.
• Various sizes of premium wire wrap sand screen in various mesh sizes and design profiles suitable for each -of the packing methods listed above;
• Filtration of packing fluid;
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services

NPDC Tender N0: EGBW-IOGD-2.0018, Expandable Sand Screen Installation

NJQS Code/Category- Production/Technology: 3.04.21. (Well Completion Services)
Scope of Work Description: Contractor must be able to provide Expandable Sand Expandable Sand Screen Installation Screens & Services including but not limited to the following;

• Various sizes of Expandable Sand Screen (ESS) w/varying gauge or mesh sizes;
• Various sizes Expandable blank pipes
• Appropriate hangers and packers for various casing sizes,
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

NPDC Tender N0: EGBW-IOGD-2.0020, Provision of Flow meters and accessories
NJQS Code/Category- Production/Technology: 1.01.10 (Production String Components)
Scope of Work Description: Contractor must be able to provide Flow Meters, Accessories and Services including but not limited to the following;

• Various ratings and specifications of flow meters
• Various accessories and sensor lines for the installation of the flow meters,
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

Geology and Geophysics

NPDC Tender N0: EGBW-IOGD-2.004 Borehole Survey Services
NJQS Code/Category- Production/Technology: 3.04.29 & 3.04.25 (Cased Hole Logging Services & Directional Surveying Services)
Scope of Work Description: Contractor must be able to provide Gyro Tools/Equipment and Services including but not limited to the following;

• Battery operated memory single-shot I multi-shots North Seeking Gyro services deployable by Drop, wireline or slickline
• Single-shot / multi-shots surface read out North Seeking Gyro
• Multi-axis Gyro sensor multi-Shots continuous North Seeking Gyro
• North Seeking Gyroscopic probe operational in MWD Collar of various major directional drilling contractors
• GR/CCL subs to run in some applications with North Seeking Gyro tools
• Mono cable or multi-conductor Wire line unit and accessories
• Gyro While Drilling (GWD) Tools;
• Wire line pressure control equipment
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above

Environmental, Health and Safety

NPDC Tender N0: EGBW4OGD-2.0025, Drill Cuttings
NJQS Code/Category- Production/Technology: 3.04.26 & 3.15.07 (Cutting, Injections/Cutting Disposal Services Waste Management Services)
Scope of Work Description: Contractor must be able to provide Cutting Disposal Services including but not limited to the following

• Waste Management Services) Mobilize equipment and tools to designated drill site and install Verti-G system, Augers or equivalent system.
• Collect drill cuttings and liquid waste mud from site into skips and vacuum trucks
• Transport cuttings and liquid mud to treatment facility
• Treat and Dispose off waste as per the guidelines of DPR and Federal Ministry of Environment (FME).
• Contractor to provide an auditable system for tracking all cuttings and drilling wastes throughout the collection, storage, processing and disposal process. These records shall be made available to NPDC and Government Agencies Including but not limited to DPR and Federal Ministry of Environment (FME).
• Contractor must have sufficient capacity to ensure that service interruptions must not occur.

Mandatory Requirements

• A To be eligible for this tender exercise, interested bidders are required to be prequalified in the relevant Product/Service groups/categories of the NipeX Joint Qualification Scheme (NJQS) database listed in the table above AU successful pre-qualified Suppliers in the relevant categories will receive Invitation to Technical Tender (ITT).
• To determine if you are prequalified for the product/service category you intend to bid for, open www.nipexng.com and access NJQS with your log-in details, click on continue to Joint Qualification Scheme Tool, dick on check my Supplier status and then click Supplier product group
• If you are not listed in a product/service category that you are registered with DPR to do business, contact NipeX office at 30 Oyikan Abayomi Street, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.
• To initiate the NJQS prequalification process, access www.nipexng.com to download application form, make necessary payments and contact the NipeX office for further action.
• To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system.

Nigerian Content
Company is committed to the development of the Nigerian Oil and Gas business in compliance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.
As from the commencement of this act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule to the Act and other targets as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB),
NNPCJNPDC iv requires their contractors to comply with the Act, its 5 attached schedule and any applicable regulation developed by the NCDMB.

Nigerian Content in the Nigerian Oil and Gas Industry is defined as:
“The quantum of composite value added to or created in the Nigerian economy by a systematic development of capacity and capabilities through the deliberate utilization of Nigerian human, material resources and services in the Nigerian Oil and Gas Industry”
“Nigerian Company” is a company formed and registered in Nigeria in accordance with the provisions of Companies and Allied Matters Act with not less than 51% equity shares by Nigerians.
Bidders shall consider Nigerian Content as an important element of their overall Project Development and Management Philosophy for project execution.

As part of their submission, Tenderers shall:

• Develop an NC Plan which shall explain the methodology of how it intends to comply with the requirements of the Act and how to achieve the set target(s) in the Schedule of the NOGICD Act and any target set by the NCDMB for required services. The plan must show utilization of Nigerian Labour Services, Materials and Equipment for the service in order to achieve the requirements of the NOGICD Act.
• Provide provide a detailed description of its committed infrastructure (asset, equipment, technical office and administrative space, storage, workshop, etc) in Nigeria to support this contract Tenderers will be required to demonstrate that 50% of the equipment deployed for operations are owned by Nigerian subsidiaries
• Provide evidence of Nigerian Content Equipment Certif4tion (NCEC)
• Demonstrate that its entity is a Nigerian indigenous company. Provide details of its Ownership Structure. Submit certified true copies of (AC forms (C02 and C07) including memorandum and article of association (Please note this service is exclusively reserved for Nigerian Indigenous Companies)
• Submit a plan on how it intends to give first consideration to services provided from within Nigeria, raw materials, manufactured and assembled goods of Nigerian origin.
• Provide evidence of specific training, certification programme man hour budget, skill development and technology transfer plan in place for its Nigerian Personnel including list of relevant training and development for indigenous staff in the last 3 years.
• Provide human Capacity training plan for. Nigerians for the development of skill pool
• Provide evidence (personnel list and positions with organizational charts to substantiate) of percentage of key Management positions that are Nigerian Nationals and the percentage of the Company total workforce (direct and in-direct employees) that are Nigerians.
• Bidders failure to comply with the NOGICD Act or demonstrate commitment to Nigerian Content Development will result in bidder disqualification.

Closing date: 10th March, 2014

Time: 4:00pm
 

Please note that:

• Only Tenderers who are registered with relevant NJQS Product/Service categories shall be invited to submit Technical Bids.
• This service is purely reserved for indigenous companies,
• Interested suppliers must be prequalified far the product/service category in NJQS.
• Full tendering procedure will be provided only to contractors that have been successfully prequalified in NJQS.
• Prior to the issuance of the Technical Invitation to Tender (ITT), all registered prospective Tenderers in the NJQS categories stated above will be assed for compliance with mandatory Nigerian Content requirements. The PT will only be issued to Tenderers who have met these requirements.
• This advertisement shall neither be construed as an Invitation to Tender (ITT) nor a commitment on the part of NPDC to award a contract to any supplier and/or associated companies, subcontractors or agents.
•  This advertisement shall not entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from NPDC and/or its partners by virtue of such companies having been prequalified in NJQS.
• All costs incurred in registering and prequalifying for this and other product/service categories in NJQS shall be borne solely by suppliers.
• Suppliers that are prequalified for this product/service category in NJQS must ensure that the name and contact details (physical address, email address and telephone number) of their company and authorized/responsible personnel is up-to-date in their company profile in the NJQS database.
• NPDC shall communicate only with the authorized/responsible personnel of prequalified companies and not through unauthorized individuals or agents.
• Please visit the NipeX Portal at www.nipexng.com for this Advert and other Information or address:

NPDC,
62/64 Sapele Road,
P.M.B. 1262,
Benin City,
Edo State,
Nigeria.