Invitation to Tender at the Nigerian Petroleum Development Company Limited (NPDC)

Posted by Future on Fri 04th Mar, 2022 - nigeriantenders.com

The Nigerian Petroleum Development Company Limited (NPDC) invites reputable and competent companies to indicate interest by submitting tender documents for the following works:

The Nigerian Petroleum Development Company (NPDC) Limited is a fully-owned subsidiary of the Nigerian National Petroleum Corporation (NNPC) established in 1988. The company is engaged in Oil & Gas Exploration and Production activities in the hydrocarbon-rich Niger Delta regions.

Apart from technical and operational management of the parent corporation’s equity interests in numerous joint-venture partnerships under Nigeria’s marginal fields programme, NPDC is also an independent operator of its own assigned oil blocks both onshore and offshore.

Applications are invited for:

Title: Invitation to Tender - Well Completion and Intervention Ancillary Services and One (1) Drilling Ancillary Service for the 2021 - 2023 Drilling and Completion Campaign NPDS;s OMLs 111, 65, 98, 49 and 116 Assets

Preamble

The Nigerian Petroleum Development Company Limited (NPDC) has a requirement for the Provision of Well completion and intervention Ancillary Services and One (1) Drilling Ancillary Services for the 2021-2023 Drilling and Completion campaign in NPDC’S OMLs 111,65,98,49 and 116 assets therefore invites reputable and competent companies for the provision of the services for her production operations.

Scope of Work

The proposed scope(s) covers as listed but not limited to the work items listed below:

S/N	Services	Scope of Work (Include but not limited to)
1	Provision of Surface Well Testing Services Product code: 3.04.14 Shopping Cart No: 1000005708	Engineering pre-job design. Execution of Surface Well Testing Services on black-oil, condensate and gas wells including but not limited Provision of Equipment/ consumables requirements and back-ups for the Surface Well Testing services, Provision of competent Surface. Well Testing personnel including Scan/Data Acquisition and Sand Detection Specialists.
2	Provision of Drill Stem Testing and Tubing Conveyed Perforation (DSTITCP) Services Product code: 3.04.26/3.0427 Shopping Cart No: 1000005709	Engineering pre-job design. Execution of Drill Stem Test & Tubing Conveyed Perforation (DST/TCP) Services. Provision of Equipment / consumables requirements and back-ups for the Drill Stem Test & Tubing Conveyed Perforation (DSTITCP), Provision of competent DST, Gauge and TCP personnel.
3	Provision of Completion Fluids Filtration Services Product code: 3.04.31 Shopping Cart No: 1000005710	Engineering pre-job design. Execution of Completion Fluids Filtration Services Provision of Equipment / consumables requirements and back-ups for the Completion Fluids Filtration Services Provision of competent personnel for Completion Fluids Filtration Services
4	Provision of Wellbore Cleaning Services Product code: 3.04.13/3.04.31 Shopping Cart No: 1000005711	Engineering pro-job design. Execution of Well bore cleaning & pumping Services. Provision of Equipment / consumables requirements and back-ups for the Well bore cleaning & pumping Services Provision of competent Personnel for well bore cleaning & pumping Services.
5	Provision of Coil Tubing Services Product code: 3.04.18 Shopping Cart No: 1000005712	Engineering pre-job design Execution of Coil Tubing Services Provision of Equipment / consumables requirements and back-ups for Coil Tubing Services. Provision of competent personnel for Coil Tubing Services
6	Provision of Pumping Services Product code: 3.04,31 Shopping Cart No: 1000005713	Engineering pre-job design. Execution of pumping Services. Provision of Equipment / consumables requirements and back-ups for pumping Services Provision of competent Personnel for pumping Services.
7	Provision of Tubing Inspection, Management & Handling Services Product code: 3.07.01/3.07.09 Shopping Cart No: 1000005714	Engineering pre-job design Execution of Tubing Inspection, Management and Handling Services Provision of Equipment / consumables requirements and back-ups for Tubing Inspection, Management and Handling Services Provision of competent personnel for Tubing Inspection, Management and Handling Services.
8	Provision of Tubing Running Services Product code: 3.04,04 Shopping Cart No: 1000005715	Engineering pre-job design Execution of Tubing Running Services for various sizes of tubing. Provision of Equipment/ consumables requirements and back-ups for the Tubing Running Services Provision of competent personnel for Tubing Running Services.
9	Provision of Cased-Hole Electric Wireline (Line) Services Product code: 3.04.09/3.04.25 Shopping Cart No: 1000005716	Engineering pre-job design. Provision of Cased-Hole Electric Wireline (Line) Logging Services Provision of Equipment / consumables requirements and back-ups for Cased Hole Electric Wireline Logging Services Provision of competent personnel for Cased Hole Electric Wireline Logging Services
10	Provision of Completion Fluid and Engineering Services Product code: 3.04.13/3.04.31 Shopping Cart No: 1000005717	Engineering pre-job design. Execution of Completion Fluids and Engineering Services. Provision of Equipment / consumables requirements and back-ups for Completion Fluids and Engineering Services Provision of competent personnel and engineering support required for performing the work effectively and efficiently
11	Provision of Fishing Services Product code: 3.04.11 Shopping Cart No: 1000005718	Engineering pro-job design. Execution of Fishing Services during drilling, completion/workover operations. Provision of competent personnel and engineering support required for performing the work effectively and efficiently
12	Provision of Gravel Pack Pumping Services Product code: 3.04.28 Shopping Cart No: 1000005719	Engineering pre-job design and fluid testing Execution of high rate water packs, viscous slurry / gel packs, frac packs, acid stimulation's, with gel and foam diverters, solvent treatment, offline well kills and under balance displacements. Provision of Equipment / consumables requirements for the gravel pack and pumping operations Consumables include but are not limited to gravel pack sand, gravel pack carrier fluid and all additives necessary to make the carrier fluid etc Provision of competent personnel for gravel pack pumping Services
13	Provision of Completion Equipment & Services Product code: 3.01.0713.04.17 Shopping Cart No: 1000005720	Engineering pre-job design. Provision of Well Completion Equipment and Services of various sizes (2-3/8”, 2-7/8”, 3-112”, 4-1/2”) standard and chromium services Provision of Equipment Itools/ consumables requirements and back-ups for deployment of Well Completion Equipment Provision of competent personnel and engineering support required for performing the work effectively and efficiently
14	Provision of Laboratory PVT Analysis Services Product code: 3.12.03 Shopping Cart No: 1000005721	Engineering pre-job design. Execution of Laboratory Pressure Volume and Temperature (PVT) Analysis Provision of Equipment consumables requirements for laboratory PVT analysis Provision of competent personnel for Laboratory Pressure Volume and Temperature (PVT) Analysis & Services.
15	Provision of Mud Logging Services Product code: 3.04.06 Shopping Cart No: 1000005722	Continuous independent measurement, recording and computerized display of all drilling mud and gas parameters while drilling, tripping and if circumstances require during well control situations Remote monitoring of standpipe pressure, pit volumes, flow in and out measurements, temperature in and out, casing pressure and trip tank measurement. Provision of ditch magnet service Produces comprehensive final well report at the end of each well describing the drilling history of the well, interpretations, conclusions and complete suites of logs, computer printouts and logs. Transmit, store and provide data in wits and ASCII format along with presentation In PDF format. Additional formation pressure prediction services.

Contract Strategy

The strategy is to engage the services of competent contractor (s) for the Provision of Well completion and Intervention Ancillary Services and One (1) Drilling Ancillary Services for the 2021 -2023 Drilling and Completion campaign in NPDC’S OMLs 111,65,98,49 and 116 Assets on a call-off basis. Following this advertisement, companies will be evaluated and ranked based on their performance. Contract shall be awarded to the lowest evaluated responsive/most technically competent bidder (s). NPDC shall retain selected companies to provide the required service during the contract duration.

Mandatory Requirements

To be eligible for this tender exercise, interested Companies are required to be pre-qualified in the relevant categories Product/Services categories in the NipeX Joint Qualification System (NJQS) database indicated above. All successfully pre-qualified suppliers in the category will receive Invitation to Tender (ITT) document for the Technical phase of the tender.
To determine if you are pre-qualified and view the products/services category you are listed for: Open http://vendors.nipex.ng.com and access NJQS with your log in details. Click on products/services status tab to view your status and product codes.
If you are not listed in a Product/Service category and you are registered with DPR to do business, contact NipeX office at No. 8 Bayo Kuku Road, Ikoyi, Lagos with your DPR certificate as evidence for verification and necessary update.
To initiate the JQS pre-qualification process, access www.nipex-ng.com click on services tab followed by NJQS.
To be eligible, all tenderers’ must comply with the Nigerian Content requirements in the NipeX system.

Nigerian Content Development

As requested by the Nigerian Oil & Gas Industry Content Development Act 2010, each Contractor Will be required to:

Demonstrate that the entity proposed for execution of the service is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria.
International or multinational companies working through a Nigerian subsidiary must demonstrate that a minimum of 50% of equipment to be deployed for execution of the work shall be owned by the Nigerian subsidiary by providing a list of equipment for this tender and including those that will be owned by the Nigerian subsidiary.
Furnish details of company ownership and shareholding structure with photocopies of Forms CAC2 and CAC7.
Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all the Nigerian companies and personnel that will be involved in executing the work also provide details of Nigeria Content focal point or manager
State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well-equipped offices and workshop.
Provide detailed plan for staff training and development.
Provide detailed description of the location of in-country offices.

Interested Companies are to note that pursuant to NPDC (NNPC) and Federal Government Policy to provide opportunities for Nigerian contractors and the development of local expertise, all the applicants must comply fully with the NOGICD Act to give preference to Nigerian companies or foreign companies with Nigerian affiliate and local ownership, which demonstrate willingness to execute the project to the satisfaction of the Nigerian Content requirements and guidelines. Each applicant is enjoined to avail themselves of the requirements of the Nigerian Oil and Gas Industry Content Development (NOGICD) Act for full compliance.

Nigerian Petroleum Development Company on behalf of the Joint Venture partners is committed to fully comply with the requirements of the NOGICD Act. In maximizing the local content of this project, pre-qualifiers are requested to give full details of their strategy for tte local content implementation in order to comply fully with the law.

In compliance with NOGICD Act requirements for Research & Development therefore, the following should be noted:

All Operators or project promoters in the Oil and Gas industry launching service contracts or other applicable projects with completion period of 12 months and above shall provide R&D implementation arrangement with at least one applicable R&D cluster approved by the Board as part of the Operator’s Nigerian Content Plan for the project or service. The arrangement shall be in the form of a Memorandum of Agreement (MOA) and indicate how the Operator will deploy the Cluster for any R&D requirements during the contract phase and the first five years of the service life of the field, facility or plant.
All Operators are to include in their ITT documents, a requirement that any service company bidding for such a project shall submit as part of Nigerian Content requirement, a signed MOA between it and one of the R&D Clusters relevant to the project. All service companies are required to sign an MOA with any of the research Clusters. The MOA shall indicate how the service company intends to use the relevant research Clusters during project execution to the satisfaction of the Board. The MOA shall form part of the documents to be reviewed at technical evaluation stage.

Application Closing Date

Only Tenderers who are registered with NJQS Product/Category Services code indicated as at 15:00 hours on Friday, March 25, 2022, being the advert closing date shall be invited to submit Technical Bids.

Additional Information

All costs incurred in preparing and processing NJQS pre-qualification and responding to this Tender Opportunity shall be to the Contractor’s own account.
This Advert shall neither be construed as any form of commitment on the part of OPERATOR to award any contract to any Contractor and or associated contractors, sub-contractors or agents, nor shall it entitle Pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from OPERATOR and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
The tendering process shall be undertaken in accordance with the NNPC contracting process in compliance with Public Procurement Act 2007
NPDC will communicate only with authorised officers of the qualifying Companies at each stage of the Tender process, as necessary, and will NOT communicate through individuals or appointed Agents.
Please note:
- Notwithstanding the pre-qualification in NipeX NJQS, NPDC is neither committed nor obliged to include your company on any bid list or to award any form of contract to your company and/or associated companies, sub-contractors or agents.
- Only pie-qualified companies in the appropriate service/suppller categorization shall be invited for tendering.
- NPDC will not enter into correspondence with any company or individual on why a company was short-listed or not short-listed. Please visit NipeX portal at www.nipex-ng.com for this advert and other information.

Disclaimer

This advertisement of “Tender Opportunity” shall not be construed as a commitment on the part of NPDC/NNPC, nor shall it entitle companies to make claims whatsoever and/or seek any indemnity from NPDC/NNPC and!or any of its partners by virtue of such companies having responded to this advertisement.